Dai Vlan Configuration; Figure 172: Dynamic Arp Inspection Vlan Configuration; Table 155: Dynamic Arp Inspection Vlan Configuration - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

DAI VLAN Configuration

Use the DAI VLAN Configuration page to select the DAI-capable VLANs for which information is to be displayed

or configured.

To display the DAI Configuration page, click LAN > L2 Features>Dynamic ARP Inspection > DAI VLAN

Configuration in the navigation tree.

Select the VLAN ID for which information is to be displayed or configured.

Select whether Dynamic ARP Inspection is Enabled or Disabled on this VLAN. The default

Logging Invalid

Select whether Dynamic ARP Inspection logging is Enabled or Disabled on this VLAN. The

default is Disable.

ARP ACL Name

The name of the ARP Access List. A VLAN can be configured to use this ARP ACL containing

rules as the filter for ARP packet validation. The name can contain 1-31 alphanumeric

Use this flag to determine whether the ARP packet needs validation using the DHCP

snooping database, in case the ARP ACL rules do not match. If Enabled, then the ARP

Packet will be validated by the ARP ACL Rules only. If Disabled, then the ARP Packet needs

further validation by using the DHCP Snooping entries. The default is Disable.

• Click Submit to apply the new configuration and cause the change to take effect. These changes will not

be retained across a power cycle unless a Save configuration is performed.

• Click Refresh to refresh the page with the most current data from the switch.

Configuring Dynamic ARP Inspection

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents