Table 5: Card Configuration Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Field
Slot
Slot Status
Admin State
Power State
Inserted Card Model
Inserted Card Description
Configured Card Model
Configured Card Description Displays the model identifier of the card pre-configured for the selected slot.
Pluggable
Power Down
• If you make any changes to the page, click Submit to apply the changes to the system.
• Click Clear to clear any pre-configuration of a card in a slot which does not have any card plugged into it. If
there is a card plugged into the slot or the slot has no card plugged and has not been pre-configured yet,
this button is not shown.
D-Link
Oct. 2015

Table 5: Card Configuration Fields

Description
Indicates the slot in the selected unit for which data is to be displayed or
configured.
Indicates whether a card is in the slot (Full or Empty).
Displays whether the slot is administratively enabled or disabled. This field is
non-configurable for read-only users.
Displays whether the slot is powered on of off. This field is non-configurable
for read-only users.
Displays the model identifier of the card plugged into the selected slot. If no
card has been plugged in, this field is not shown.
Displays the description of the card plugged into the selected slot. If no card
has been plugged in, this field is not shown.
Displays the model identifier of the card pre-configured for the selected slot.
If no card has been pre-configured, this field is not shown.
If no card has been pre-configured, this field is not shown.
Displays the pluggable indicator of the specified slot.
Displays the power down indicator of the specified slot.
Card Configuration
Unified Wired and Wireless Access System
Page 67