Colour For Zone 4 (Up To 99%) - ABB i-bus KNX Product Manual

11.5.138.11

Colour for Zone 4 (up to 99%)

Options:
Off:
■
– The button LEDs are switched off.
Yellow - white:
■
– The button LEDs light up in the fixed colour at value telegrams for zone 4.
The parameter is used to specify the colour the RTC button LEDs light up in when a telegram
with a value is received via the 1-byte communication object "Status LED", which meets the
following conditions:
Value is ≥ S2 and
■
Value is ≤ 99%.
■
The default setting is "red-orange".
The threshold value S2 is set via the parameter "Threshold between Zone 3 and 4" (%).
Note
The parameter can only be set if the "Operating mode" parameter and is set on
"Status illumination" and the "Object type for status object" parameter is set on
"1 byte 0-100%".
Product manual 2CKA001473B9482
Description of application and parameters
Off
Yellow
Red-orange
Red
Violet
Blue
Green
White
Application "Function block RTC"
│133