Switching On And Off - ABB i-bus KNX Product Manual

9.4.1

Switching On and Off

1
2
Fig. 24: RTC control elements
Note
In the OFF mode all functions and all buttons of the device (except button [1])
are deactivated.
Product manual 2CKA001473B9482
Switch-on
4
1. Press the button [1].
3
Switch-off
1. Press the button [1] continuously until
2. Press the button [1] again several
3. Press the button [1] continuously until
– The functions which were active
before deactivation are activated.
– The set-point temperature is
shown on the display.
the display flashes.
times until function "ON/OFF" is
displayed.
the device switches into the "Off"
status.
Operation
│35