Automatic Switchover Time; Brightness Of The Led During Blockage - ABB i-bus KNX Product Manual

11.3.2.2

Automatic switchover time

Options:
The switching on or switchover always occurs immediately the user has approached the device.
The switching off or switchover can be delayed via parameter "Automatic switchover time". In
this way, for example, the display stays switched on for a while longer although the user has
just moved away from the device.
Note
The parameter can only be set when parameter "External proximity via object" is
deactivated.
11.3.2.3

Brightness of the LED during blockage

Options:
Off:
■
– The LED does not light up at blockage.
Dark:
■
– The LED lights up dark at blockage.
Bright:
■
– The LED lights up bright at blockage.
The parameter is used to specify whether or in which brightness the LED lights up when the
device is blocked.
Product manual 2CKA001473B9482
Description of application and parameters
Setting option from 00:00:10 to 18:00:00 (hh:mm:ss)
Off
Dark
Bright
Application "Device settings"
│58