Application - Delay; Channel Name - ABB i-bus KNX Product Manual

11.6.7

Application - Delay

The application can be used to receive telegrams via the "Input" object. The telegrams received
are sent out via the "Output" object with a set delay time.
The application has the following communication objects:
"GFx: input"
■
"GFx: output"
■
"GFx: delay time" ((2 byte object)
■
The objects "GFx: input" and "GFx: output" can take on different sizes (1 bit - 4 byte, depending
on the object type selected).
The bit sizes of objects "GFx: input" and "GFx: output" can be collectively adjusted for the
different applications.
Note
The parameters for application "Delay" can be called up via general
parameters and extended parameters .
Note
The number of the object (GF1 - GFx) depends on the channel used.
11.6.7.1

Channel name

Entry:
The parameter can be used to name the selected channel. The preset name "Channel" can be
replaced with any arbitrary name. The length of the name is limited to 30 characters.
Product manual 2CKA001473B9482
Description of application and parameters
<Name>
Application "General functions"
│163