ABB i-bus KNX Product Manual page 43

Function block RTC —
Control settings —
General
Function block RTC —
Control settings —
Temperature display
Function block RTC —
Control settings —
Brightness settings
Function block RTC —
Control settings — Button
configuration
Function block RTC —
RTC — General
Function block RTC —
RTC — Heating
controller
Function block RTC —
RTC — Basic stage
heating
Product manual 2CKA001473B9482
Description of application and parameters
Value 1
Value 2
Jump-back time to the primary function
Temperature unit
Setting the temperature unit via object
Display of the actual temperature
Waiting period for display of actual
temperature
Day/Night mode
Brightness of display backlighting
Button top left
Button top right
Device function
Overwrite local setting at download
Control function
Operating mode after reset
Send cyclic "In operation" (min)
Additional functions/objects
Delay time for read telegrams after reset (s)
Control value type
Heating type
P-component (x 0.1°C)
I-component (min)
Advanced settings
Status object heating
Mode of control value
Hysteresis (x 0.1°C)
Control value difference for sending of
heating control value
Overview of functions
Setting dependent on object
type
Setting dependent on object
type
5 s / 10 s / 20 s / 30 s / 1
min. / 2 min. / 4 min.
°C / °F
No / yes
No / yes
5 s / 10 s / 20 s / 30 s / 1
min. / 2 min. / 4 min.
No / yes
Dark / bright
Eco / ON/OFF / Menu / Fan
Eco / ON/OFF / menu / fan
Single device / master
device / slave device
Deactivated / activated
Heating / heating with
additional stage / cooling /
cooling with additional stage
/ heating and cooling /
heating and cooling with
additional stages
Comfort / standby / Eco
mode / frost/heat protection
5 - 3000
No / yes
1 - 255
2-point 1 bit, on/off /
2-point 1 byte, 0/100% /
PI continuous, 0-100% /
PI PWM, on/off / fan coil
Area (e.g. floor heating) 4°C
200 min. / convector (e.g.
heater) 1.5°C 100 min. / free
configuration / fan coil 4°C
90 min. / free configuration
Setting dependent on
"Control value type"
10 - 100
0 - 255
No / yes
No / yes
Normal / inverse
3 - 255
2% / 5% / 10% / send cyclic
only
│43