Filter Function - ABB i-bus KNX Product Manual

3-byte time of day:
■
– The value is sent as 3-byte daytime value.
3-byte date:
■
– The value is sent as 3-byte date value.
4-byte float:
■
– The value is sent as 4-byte floating point value, physical values, e.g. luminosity, electric
power, pressure.
4-byte signed:
■
– The value is sent as 4-byte value with a sign (-2147483648 - 2147483647), e.g.
counting impulse, time difference.
4-byte unsigned:
■
– The value is sent as 4-byte value without a sign (0 - 4294967295), e.g. counting
impulse.
Not allocated:
■
– The bit size can be freely allocated. This means that the first internal or external group
address or action that is assigned and already connected to an other communication
object will specify the size.
The set option fixes the bit size of the input and output object.
11.6.5.3

Filter function

Options:
Deactivated:
■
– No telegrams are filtered out.
On filter out:
■
– On telegrams are filtered out.
Off filter out:
■
– Off telegrams are filtered out.
The parameter can be used to filter On or Off telegrams (1 bit) out. The function is used, for
example, when only the On telegram is needed and the sensor does not offer any filter function
in its application program.
Note
The parameter can only be set if the "Object type" parameter is set on "1-bit
switching".
Product manual 2CKA001473B9482
Description of application and parameters
Deactivated
On filter out
Off filter out
Application "General functions"
│155