Data Flow Direction; Enable Object - ABB i-bus KNX Product Manual

11.6.5.4

Data flow direction

Options:
Input towards the output:
■
– Telegrams are transferred from object "GFx: input" to object "GFx: output".
Output towards the input:
■
– Telegrams are transferred from object "GFx: output" to object "GFx: input".
In both directions:
■
– Telegrams are transferred in both directions.
The parameter is used to specify the direction in which the signal is to be transferred.
11.6.5.5

Enable object

Options:
Deactivated:
■
– Object "GFx: control input" is not enabled.
Activated:
■
– Object "GFx: control input" is enabled. The function can be temporarily blocked via
object "Sx: control input".
The 1-bit communication object "GFx: control input" can be enabled with this parameter.
Note
If the "Enable object" parameter is activated, the following parameters can be
set:
■
■
■
Product manual 2CKA001473B9482
Description of application and parameters
Input towards the output
Output towards the input
In both directions
Deactivated
Activated
"Object value enable object"
" Enable object after return of voltage"
" Save input signal"
Application "General functions"
│156