Changing The Operating Status (Heating/Cooling) - ABB i-bus KNX Product Manual

9.4.5

Changing the operating status (heating/cooling)

1
2
Fig. 28: Heating/cooling operating mode
When the "Heating" and/or "Cooling" control function is activated, the operating mode that is
currently set is indicated on the display.
Product manual 2CKA001473B9482
1. Press the button [1] continuously until
the display flashes
4
2. Press the "Menu" button [1].
–
3
3. Select the desired operating mode
with buttons [2] and [3].
–
Operation
Keep pressing it until the function
"Operating mode" is shown on
the display.
After an adjustable time the
device changes back into the
mode that was active before the
adjustment of the operating
mode. E.g. into comfort
operation.
│39