ABB i-bus KNX Product Manual page 25

1
Fig. 16: Programming button
Fig. 17: Mounting devices
Product manual 2CKA001473B9482
Connection, installation / mounting
4. To commission the device, see
chapter 7 "Commissioning" on page
27.
–
2
5. Installing the device.
–
The device is now mounted.
Programming is carried out via
the programming button [1] on
the rear of the device.
– Press the programming
button [1].
– All LEDs [2] light up red.
Snap the device into the support
ring by hand.
│25