Filter Function; Filter Value - ABB i-bus KNX Product Manual

11.6.7.6

Filter function

Options:
Filter value is delayed, other values are sent directly.
■
– Only the filter value is sent delayed All other values are sent directly.
Filter value is delayed, other values are suppressed.
■
– Only the filter value is sent delayed. All other values are blocked.
Filter value is sent direct, others are sent delayed.
■
– Only the filter value is sent direct. All other values are sent delayed.
Filter value is suppressed, other are delayed.
■
– Only the filter value is blocked. All other values are sent delayed.
The parameter can be used to specify a condition for the sending of filter values compared to all
other values.
Note
The parameter is only adjustable if the "Filter active" parameter is set to
"Activated".
11.6.7.7

Filter value

The possible options and setting limits depend on parameter "Object type".
Options for selection "1 bit switching":
Options:
Options for selection "1 bit moving" and "1-bit stop/adjust":
Options:
Options for selection "1 byte 0-100%":
Options:
Options for selection "1 byte 0-255":
Options:
Product manual 2CKA001473B9482
Description of application and parameters
Filter value is delayed, other values are sent directly
Filter value is delayed, other values are suppressed
Filter value is sent directly, other values are delayed
Filter value is suppressed, other values are delayed
Off
One
Up
Down
Setting option from 0 to 100 (%)
Setting option from 0 to 255
Application "General functions"
│166