Epson RC620 Manual page 137

4.
5.
6.
Editing of input / output size and DAP mode
You can change the input/output size of the PROFINET slave board if necessary.
1.
2.
RC620 Option Fieldbus I/O Rev.8
Click [Fieldbus Slave]-[General].
(4)
Make sure that following are displayed.
Fieldbus Type : PROFINET IO
Input Byte : 32 (default setting)
Output Byte : 32 (default setting)
Click <Close>.
Select [Setup]-[System Configuration] and display the [System Configuration] dialog
box.
Select [Inputs / Outputs]-[Fieldbus Slave]-[General].
2. Installation
(5)
127