Line Speed: Lsp - Panasonic LP-GS Series Serial Communication Command Manual

3-11-3 Line speed: LSP

Supported model: LP-RC series / LP-RF series / LP-RV series
Sets the line speed of on-the-fly marking for the selected marking file.
⿎ Setting request data / response data for readout
Start
LSP
code command
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
LSP
code
⿎ Data description
Data length
Name
Line speed
Total data length
⿎ Example of command settings
Condition: Line speed = 80
• Setting
Transmission data
• Readout
Transmission data
Response data
Sub [Line speed]
7-byte
R (Check sum) End code
Data contents
[byte]
7 "000.060"–"240.000" [m/min.]
7 Fixed length.
[STX] LSP
[STX] LSP
[STX] LSP
ME-LP-GS-SR-COMP-3
(Check
End code
sum)
Only when line speed control is set to
"fixed speed", set this value.
S 080.000 [CR]
R [CR]
A 080.000 [CR]
Remarks
125