Panasonic LP-GS Series Serial Communication Command Manual page 52

Type Name
Character entry (by ASCII code)
Character entry (by ASCII and
Shift-JIS code)
Character entry per trigger
Character object settings
Character object settings
(shortened)
Counter settings
Counter reset
Expiry date/time settings
Lot settings
Lot character
Registered character settings
Registered character strings
Bar code/2D code characters (by
ASCII code)
Bar code/2D code characters (by
ASCII and Shift-JIS code)
Bar code/2D code object settings
Human readable text settings
Module filling of 2D codes
52
Code Functions
MCS Sets the characters of the character objects (reference
list type) by the ASCII code. Alpha-numeric characters
and symbols are available.
STR Sets the characters of the character objects (reference
list type). Characters including alpha-numeric,
functional characters and Japanese characters are
available.
SIN When "Characters specified by SIN command" is set
for character objects or barcode/2D code objects,
input characters with this command. Send this
command per each marking.
STC Sets the position and size of the character object
(reference list type) and conditions including text
characteristics.
SPC Sets only X-/Y-position and laser power correction in
the character object settings.
CNT Configures the "counter" function used to mark
consecutive numbers.
CTR Resets the current value to the starting value.
LMT Configures the "expiry" function used to mark the date
with a specified period added or subtracted to/from
the current date.
LTC Configures the "Lot" function used to change
characters depending on the date/time and counter
values.
LTS Sets the characters used with the "Lot" function to
change characters depending on the date/time and
counter values.
RKC Sets the input format of the "Registered characters"
function used to switch characters by I/O input.
RKS Sets the character string used with the "Registered
characters" function that switches characters by I/O
input.
BCS Sets the characters to encode of the bar code/2D
code objects by the ASCII code. Alpha-numeric
characters and symbols are available.
BRS Sets the characters to encode of the bar code/2D
code objects. Characters including control codes
(specified with 2-byte alternative codes), alpha-
numeric, functional characters, and Japanese
characters are available.
BRF Sets the conditions such as the position and size of
the bar code/2D code as well as code characteristics.
BRV Sets the character conditions to mark the character
strings of bar code/2D code as the human readable
text.
BRP Sets the laser settings and filling details with a font by
each element of the 2D code.
ME-LP-GS-SR-COMP-3
Refer
(P.69)
(P.70)
(P.72)
(P.74)
(P.78)
(P.79)
(P.80)
(P.81)
(P.82)
(P.83)
(P.85)
(P.86)
(P.87)
(P.89)
(P.91)
(P.100)
(P.103)