Communication Settings (Lp-400/V Compatible Mode) - Panasonic LP-GS Series Serial Communication Command Manual

1-3-2 Communication settings (LP-400/V compatible mode)

Item
Synchro system
Communication type
Baud rate
Data length
Parity
Stop bits
Flow control
Check sum
End code
Start code
Response data command
Sub command
Character code
Encoding for 2-byte
characters
Reception timer
• For the details of the communication settings, refer to "1-1-3 Settings before external control" (P.14).
RS-232C communication settings (LP-400/V compatible mode)
Start-stop method
Full-duplex transmission
1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 bps (initial setting: 9600 bps)
8-bit fixed
None / Even / Odd (initial setting: None)
1-bit / 2-bit (initial setting: 1-bit)
None
OFF / ON (initial setting: OFF)
CR / CR + LF (initial setting: CR)
• Setting request data, Readout request data, Response data for readout: STX
• Positive response code: ACK
• Negative response code: NAK
Included only in response data for readout
• Setting request data: S
• Readout request data: R
• Response data for readout: A
ASCII code
Shift-JIS code
Timeout monitoring ON (10 sec.)
ME-LP-GS-SR-COMP-3
21