File Name: Fnm - Panasonic LP-GS Series Serial Communication Command Manual

3-4-5 File name: FNM

Sets the file name of the file number selected.
⿎ Setting request data / response data for readout
Start
FNM
code
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
FNM
code
⿎ Data description
Data length
Name
[byte]
Min. 1
File name
Max. 20
Total data
Max. 20
length
• Refer to "2-3-5 Character data input method" (P.37) for details on the character input method and character types with
input restrictions.
• If the file name contains any characters which belong to the non-supported character code, the file name cannot be
readout.
• Set one or more characters for this command. You cannot delete file names.
• At LP-400/V compatible command mode, you cannot readout the file name with more than 21-byte length.
⿎ Example of command settings
Condition: File name = abcd
• Setting
Transmission data
• Readout
Transmission data
Response data
68
Sub [File name]
command Max. 20-byte
R (Check sum)
Data contents
The number of input characters
allowed is 1 to 20 characters.
Input Method: ASCII code or Shift JIS
code (can be mixed)
Variable length.
[STX] FNM
[STX] FNM
[STX] FNM
(Check sum)
End code
• Use the ASCII code to specify one-byte
• Use the Shift JIS code to specify two-byte
S abcd [CR]
R [CR]
A abcd [CR]
ME-LP-GS-SR-COMP-3
End code
Remarks
characters (single byte characters).
characters (double byte characters).