Panasonic LP-GS Series Serial Communication Command Manual page 139

⿎ Connection with Laser Marker NAVI smart
Troubles
Online connection fails
(The laser marker is not
indicated as an available
laser marker)
Online connection is
disconnected.
Ethernet online
connection fails
For LP-GS series:
Bluetooth online
connection fails
Causes
Laser marker has not been started.
PC and laser marker are not
connected.
USB driver is not installed properly.
PC is in the sleep or hibernate state.
The PC stayed no communication
state with the laser marker for a certain
period of time with the high load (high
CPU usage).
Ethernet communication settings are
incorrect.
Ethernet is not listed as an available
laser marker search condition.
A laser marker of the model not
compatible with Bluetooth is used.
Bluetooth communication setting is
disabled.
PC's Bluetooth module is apart from
the head of the laser marker.
The ambient environment is not suited
for Bluetooth communication.
• Wireless LAN or other wireless
device is used around.
• There is an obstacle between the
laser marker head and the PC.
• The environment is subject to
weaker radio wave signals.
ME-LP-GS-SR-COMP-3
Measures
Refer to "Start-up" in Troubleshooting.
Connect them with a USB cable or a LAN cable.
Refer to the "Laser Marker NAVI smart Operation
Manual" to install the USB driver to all the laser
markers to connect.
To maintain the online connection, disable the
sleep setting of the PC.
To maintain the online connection, terminate the
high CPU usage application.
Establish the USB online connection and confirm
the Ethernet communication settings in the
system settings. Then, restart the laser marker.
In the laser marker selection screen, select the
"Including Ethernet" checkbox and search for
laser markers.
Bluetooth function is available for the following
laser markers.
LP-GS051 / LP-GS051-E / LP-GS051-L /
LP-GS051-LE / LP-GS052 / LP-GS052-E
Establish the USB online connection and enable
the Bluetooth communication in the system
settings. Then, restart the laser marker.
Operate the product with the laser marker head
within 5m from the PC.
Establish Bluetooth communication in an
environment suited for stable wireless connection.
139