Status Checking: Sts - Panasonic LP-GS Series Serial Communication Command Manual

3-3-7 Status checking: STS

Reads out the laser marker status, such as marking trigger ready status and error occurrence status.
⿎ Readout request data
Start
STS
code
⿎ Response data for readout
Start
STS
code
⿎ Data description
Data length
Name
Error occurrence
status
Laser pumping
status
Command
reception status
Marking trigger
ready state
Marking at regular
intervals ON/OFF
Total data length
• "02110" is the response data for status checking with the marking trigger ready ON.
62
R (Check sum)
[Error occurrence status] [Laser pumping status]
[Command reception status] [Marking trigger ready state]
A
[Marking at regular intervals ON/OFF]
Data contents
[byte]
"0": No error
1
"1": Error occurrence
"0": Laser pumping OFF
1 "1": Laser pumping in preparing
"2": Laser pumping completed
"0": Command reception
permission ON
1
"1": Command reception
permission OFF
"0": Marking trigger ready OFF
1
"1": Marking trigger ready ON
"0": Marking at regular intervals
OFF
1
"1": Marking at regular intervals
ON (Trigger ON state)
5 The data length is fixed.
End code
5-byte
• Indicates the command reception permission
(MKM command) status. Use this for
determination of whether various commands
can be transmitted. For details, refer to "2-4
Command Reception Condition" (P.42).
• When the shutter is closed, the response data
is "0".
• When the shutter is opened and no MKM
command is sent, the response data is "1".
Marking trigger can be input only with the marking
trigger ready ON.
• When the on-the-fly marking at regular
intervals is set, this response data indicates
the marking trigger ON/OFF state.
• When the marking at regular intervals is not
used, the response data is always "0".
ME-LP-GS-SR-COMP-3
(Check
End code
sum)
Remarks