NEC UNIVERGE SV8300 Pc Programming Manual page 113

No. Item
(1) [New] ( ) button
(2) [Open] ( ) button
(3) [Save] ( ) button
(4) [Save as...] (
(5) Script File Name field
(6) Title field
(7) Script Entry
Area
(8) [Clear] button
(9) [Read] button
Click to create a new script file.
Click to open (import) a script file.
Click to save (export) the contents of the script shown in the
screen to the current script file.
) button Click to create (export to) a script file from the contents of
the script shown in the screen.
Displays the drive, path and file names of a script file
imported or exported.
Displays and/or edits the title of the script file specified in the
Script File field.
CMD field Displays and/or edits the command code and YY number.
• Input characters: 0 to 9, A through F, a through f (a through
f are converted to uppercase automatically)
• Input length: Up to six characters
FD field Displays and/or edits the first data portion of the command
code.
• Input characters: 0 to 9, A through F, a through f (a through
f are converted to uppercase automatically) and comma (,)
• Input length: Up to 16 characters
SD field Displays and/or edits the second data portion of the com-
mand code.
• Input characters: No limitation
• Input length: Up to 256 characters
ED field Displays command code-specific SV8300 response data.
• Input characters: Other than CCC
• Input length: Up to 24 characters
MESSAGE Displays or edits a command code comment.
field • Input characters: Unlimited
• Input length: Up to 256 characters
Click to clear the data shown in the Script Entry Area.
Click to read the contents of the script shown in the screen as
system data on the SV8300.
Description
4-67
Chapter 4 Standard Mode
[Tools] Category
Continued on next page
NWA-033628-001 Rev.1.0