NEC UNIVERGE SV8300 Pc Programming Manual page 65

Tips: Using the [Fill In] Button
Click the [Fill In] button to display the dialog box shown below. Enter the number of lines
into which station numbers are to be entered continuously into the Line Input field and click
the [OK] button.
You are directed back to the [6. Setting of IP Station] screen, and station numbers and rel-
evant data are entered into the second and subsequent lines automatically.
STEP3: Click the [OK] button.
The [Quick Setup] screen appears again, with a check mark to the right of button [6].
The IP Station has now been configured.
[OK] button
4-19
Chapter 4 Standard Mode
[Implement] Category
NWA-033628-001 Rev.1.0