NEC UNIVERGE SV8300 Pc Programming Manual page 159

SETTING DATA
DATA
A152 System Speed Dialing Origination
A154 Return Message Schedule Set
A156 Attendant Programming for Remote Access to System
(DISA), System Speed Dialing
A157 FLF Authorization Code Recognition
A158 Sending of Hooking Signal to C.O. line/Centrex from PB
telephone
A163 Voice Call/Ring Tone Programming
A164 All Zone Internal Paging
A165 Voice Message Waiting Service-Individual All Clear when
the called station does not answer
A170 Malicious Call Trace
[Australia Only]
A180 Split Call Forwarding-All Calls Set
A181 Split Call Forwarding-All Calls Cancel
A182 Split Call Forwarding-Busy Line/-No Answer Set
A183 Split Call Forwarding-Busy Line/-No Answer Cancel
A188 Whisper Page
A189 Call Forwarding-Not Available Set
A190 Call Forwarding-Not Available Cancel
A191 Call Forwarding-Not Available Replay
A192 Number Sharing Set from sub station
A193 Number Sharing Cancel from sub station
A194 Number Sharing Set from main station
A195 Number Sharing Cancel from main station
A196 Set Relocation
A197 System Clock Setup by Station Dialing
A198 Call Park-System Set which retrieved by dialing station
number
A199 Call Park-System Retrieve by dialing station number
A230 Station Class change with Station Authorization Code
MEANING
5-15
Chapter 5 System Data Mode
Using System Data Mode
REMARKS
For 1000 memories
(1000-Slot Memory Block No. 00)
Cancel Code: Set data A023.
For Multiline Terminal
For calling
Continued on next page
NWA-033628-001 Rev.1.0