NEC UNIVERGE SV8300 Pc Programming Manual page 77

STEP8: Select a registered blade and click the [Zoom In] button or double-click the slot.
A dialog box appears to let you know when the data read is complete. PCPro reads detailed
information from the SV8300 and displays a [Blade Configuration] screen in the work win-
dow.
STEP9: Click the [OK] button.
STEP10: Set item (2).
(1)
(2)
No. Item
(1) Blade information display area Displays the name of the blade which detailed data is con-
(2) System data
setup area (for
station blades)
figured, the blade number and the number of the slot in
which it is mounted.
Port No. Displays the number of port that houses a Single Line Tele-
phone or Multiline Terminal (unit number + slot number +
line number).
CKT No. field Displays the line number on the blade.
Station Num- Enter an station number associated with the Port number
ber field and line number according to the numbering plan setting.
• Up to 8 digits [0 to 9, *, #, blank field] (default: blank
field)
Description
4-31
Chapter 4 Standard Mode
[Implement] Category
(4)
(5)
(3)
(6)
(7)
Continued on next page
NWA-033628-001 Rev.1.0