NEC UNIVERGE SV8300 Pc Programming Manual page 223

Error Message
A file transfer error occurred. Do
it again from the beginning.
FTP server has a problem.
Confirm the following items, and
do it again from the beginning.
• If another FTP Server being
active on a PC, stop for it.
• Confirm selecting the Menu
item [Tools] > [Configuration]
> [FTP Server].
Couldn't return the IP Address to
default because that LAN cable
is unplugged or Network Con-
nection is in an invalid state.
The original IP address could not
be restored.
Quick Setup
Error Message
Failed to clear all the system
data. Confirm the SENSE SW of
CPU blade, and do it again.
Failed to back up the system
data.
Please try again later.
Failed to back up the system
data, and do it again.
Cause
An error occurred transfer-
ring a file.
The FTP server is at fault.
–
–
Cause
System data all clear failed.
Backup of system data saved
on the SV8300 failed.
Backup of system data failed
following its all clear.
C-11
Appendix C Troubleshooting
Remedial action
Retry from the beginning.
Shut down the FTP server once
and the retry.
Connect the PC LAN cable and
check the status of network con-
nectivity.
Restore the IP address manually.
The original IP address is stored
the following file.
<INSTALL folder> ¥ UserDB ¥
Program ¥ Upgradeoffline-IP
Address. txt
Remedial action
Check that the [SENSE] switch
on the CPU blade is set to E and
then retry.
Retry the system data backup.
Page 2-16
Wait for a while before retrying
the system data backup.
NWA-033628-001 Rev.1.0