NEC UNIVERGE SV8300 Pc Programming Manual page 176

No. Item
(4) Entry mode/Charac-
ter mode display
Command Entry
Commands are entered in combination of system data (command, first data, second data) and control
codes.
<Control Code List>
There are three modes of control code entry, as follows:
• Classic Mode : Control codes entry that are assigned to [.], [Space], [/] and other keys.
• Standard Mode : Control codes entry that are assigned to a PC's function keys.
• Enter Mode : Control codes entry that are assigned to [Enter] key.
Control
code
[ST] Start of command entry.
[DE] • End of command entry
• End of first data entry
• Read second data that has been set
in input first data.
[EXE] Set second data.
[CE] Cancel entries.
[S] Read the second data that has been
set as the next batch of first data.
Displays the present control code entry mode (Classic/Standard/Enter)
and the ON/OFF states of the character mode.
• The ON/OFF states of the character mode have the following mean-
ings:
- Character mode OFF: Only 0 to 9 and A to F comma (,), period (.) can
- Character mode ON : All data can be entered. The control code is oper-
• Function key F12 is used to switch the character mode ON and OFF.
Meaning
Description
be entered (a to f are automatically converted to
A to F). The control key is inoperable.
able.
Control keys
Classic Standard
Mode
[/] (slash) [F9]
[Space] [F8]
[.] (period) [F2]
[:] (colon) [F3]
[Enter] [F4]
6-4
Chapter 6 Command Mode
Using Command Mode
Enter Mode
Mode
[Esc]
[Enter]
[Enter]
[←]
[ ↓ ]
Continued on next page
NWA-033628-001 Rev.1.0