NEC UNIVERGE SV8300 Pc Programming Manual page 57

STEP2: Set items (1) to (3) for the SV8300 (CPU blade) and RTP (VoIPDB blade).
(1)
(1)
(4)
(5)
[OK] button
No. Item
(1) IP Address field
(2) Subnet Mask field
(3) Default Gateway
field
(4) RTP Channel Count
selection field
Enter the IP addresses of the SV8300 maintenance port and VOIP port
(UDP/TCP).
• 0.0.0.1 to 255.255.255.254
(default: 192.168.1.1 [maintenance port]/172.16.1.1 [VOIP port])
Enter the subnet masks of the SV8300 maintenance port and VOIP
port.
• 255.0.0.0 to 255.255.255.252
(default: 192.255.255.0 [maintenance port]/255.255.0.0 [VOIP port])
• Make sure that subnet mask of the maintenance port and VOIP port
are not the same.
Enter the default gateways of the SV8300 maintenance port and VOIP
port.
• 0.0.0.1 to 255.255.255.254 (default: blank)
Select the number of RTP channels used on the VoIPDB blade from a
dropdown list for display.
• Selection range: 016 to 128 (in groups of 16 channels)
(default: all channels on the mounted blade 64/128)
4-11
Chapter 4 Standard Mode
Description
[Implement] Category
(7)
(2)
(3)
(2)
(3)
(6)
Continued on next page
NWA-033628-001 Rev.1.0