NEC UNIVERGE SV8300 Pc Programming Manual page 225

Error Message
Failed to load the system data.
Failed to load the system data.
(Writing error of the system data
occurred.)
Failed to load the system data.
(Could not open the system data
file.)
Failed to load the system data.
(The format of the system data
file is invalid.)
Failed to load the system data.
(Cannot use the specified system
data area.)
Failed to load the system data.
(Checksum error occurred.)
Failed to load the system data.
(System data version error)
Failed to reset the system.
The file header is wrong.
Failed to read the file header.
Loading the system data was
completed. But, failed to back up
the system data to the flash
ROM.
Cause
An error occurred.
The SV8300 responded with
"Write error" while system
data was loaded.
The specified file has been
opened by another applica-
tion.
The system data file has an
invalid format.
System data was loaded by
specifying a system data area
in which there was no system
data.
The SV8300 responded with
"Checksum error" while sys-
tem data was loaded.
The version of files to be
loaded is not match with the
system.
–
The specified system data
file has an invalid header.
Reading of the header of a
specified system data file
failed.
Backup of loaded system
data to flash ROM failed.
C-13
Appendix C Troubleshooting
Remedial action
Retry.
Retry.
Close the file.
Select a file having the valid con-
figuration.
Select a file having the valid con-
figuration.
Select a file having the valid con-
figuration.
The error files can not be used.
The files have been already
saved should be used.
Retry the system reset, or press
the [Reset] button on the unit.
Select a file having the valid con-
figuration.
Select a file having the valid con-
figuration.
Retry the backup of the system
data to flash ROM.
Continued on next page
NWA-033628-001 Rev.1.0