Loading System Data - NEC UNIVERGE SV8300 Pc Programming Manual

Loading System Data

You can load the system data saved onto PCPro into the SV8300 in these steps:
NOTE: Before applying system data that has been loaded into the SV8300, be sure to make a back
up of the data and reset the system in Steps 5 and 6. If the SV8300 is powered off or a system
data back up is executed without first executing a system reset, the loaded system data would
be lost.
STEP1: Click [Load] button in the [System Data Save/Load/Verify] screen.
The [Load] screen is displayed in the work window.
[Select File] button
(1)
(2)
(3)
[Load] button
[<< Back] button
Return to the [Load] screen to confirm.
No. Item
(1) Select the File Name field
(2) File Date/Time field
Informa-
tion field
Office Name field
Displays the specified folder and file name.
Displays the Date & Time at which the specified system
data file was saved.
Displays the registered office name when the system data
was saved.
4-85
Chapter 4 Standard Mode
[Maintenance] Category
Description
Continued on next page
NWA-033628-001 Rev.1.0