Outline Of This Manual - NEC UNIVERGE SV8300 Pc Programming Manual

Outline of This Manual

This manual consists of eight chapters and three appendixes. The following paragraphs summarize chap-
ters 1 through 8 and Appendixes A, B and C.
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 4
CHAPTER 5
CHAPTER 6
CHAPTER 7
CHAPTER 8
APPENDIX A Main Menu and Toolbar Correspondence
PCPro Overview
Provides introductory information about PCPro and proceeds to describe its system
configuration, operating environment, working conditions and more.
Setting Up the PCPro
Explains how to connect the SV8300 and PCPro, how to install, launch and exit the
application, establish a communication link between the SV8300 and the PCPro.
PCPro Window Layout
Explains the PCPro window layout, submenus on the screen and the function of the
work window, etc.
Standard Mode
Explains the functions that can be configured in Standard Mode and how to operate
them.
System Data Mode
Explains how to use System Data Mode.
Command Mode
Explains how to use Command Mode and the operational screens.
Reporting
Explains how to view fault information the result of system data, system
configuration information and a log of system data upgrades stored on the SV8300
from PCPro in a report format.
Settings
Explains how to configure PCPro to communicate between the SV8300 and PCPro,
and configure the environment.
List of menu bar function, toolbar functions and the associated shortcut keys.
2
INTRODUCTION
Outline of This Manual
NWA-033628-001 Rev.1.0