Blade Configuration - NEC UNIVERGE SV8300 Pc Programming Manual

Blade Configuration

The [Blade Configuration] menu lets you register additional blades, update data on pre-registered data, de-
lete blade information and so on for each Unit. One of the following action will display the [Blade Con-
figuration] screen in the work window:
• Click submenu [Blade Configuration] in Standard Mode.
• On the Main Menu, click [Edit] > [Blade Configuration] in this order.
[Blade Configuration]
Menu
(2)
(1)
(3)
No. Item
(1) Unit No. field
(2) [Change Unit Num-
ber] buttons
(3) Blade Display Area
Select the unit number of the SV8300 from which you want to read infor-
mation.
• 01 to 50 (default: 01)
Click to change the number entered in the Unit No. field.
• [Previous] button: Decrement the number by one.
• [Next] button: Increment the number by one.
View this area to confirm blade mounted in the individual slots in the
SV8300 or register new blade. Blade names are marked in different col-
ors by blade type.
• Station blade
• Trunk line blade
• Other blades
• Blade without set system data : White
4-27
Chapter 4 Standard Mode
Description
: Light blue
: Light yellow
: Light red
[Implement] Category
(4)
(5)
(6)
Continued on next page
NWA-033628-001 Rev.1.0