NEC UNIVERGE SV8300 Pc Programming Manual page 180

<Resetting System Data (Second Data) to Its Default>
STEP1: Enter [ST].
• Classic Mode : [/] key
• Standard Mode : [F9]key
• Enter Mode
STEP2: Enter a command and then enter [DE].
• Classic Mode : Command + [Space] key
• Standard Mode : Command + [F8] key
• Enter Mode
STEP3: Enter first data and then enter [DE].
• Classic Mode : First data + [Space] key
• Standard Mode : First data + [F8] key
• Enter Mode
Second data is displayed.
STEP4: Enter [CCC].
• Classic Mode : "CCC" + [Enter] key
• Standard Mode : [F10] key
• Enter Mode
System data (second data) has now been reset to its default.
: [Esc] key
: Command + [Enter] key
: First data + [Enter] key
: [Delete] key
6-8
Chapter 6 Command Mode
Using Command Mode
NWA-033628-001 Rev.1.0