No.
Item
(10) [Apply] button
Create a Script File
There are three ways to create a script file as described below. Here, method 1 is highlighted.
1. Write a system data script in Microsoft Excel and convert it to a CSV file (using the [Open] (
button).
2. Enter a system data script directly in the Script Entry Area (using the [New] (
3. Read system data from the SV8300 to the Script Entry Area and edit it (using the [Read] button).
STEP1: Launch Microsoft Excel.
STEP2: Specify Columns A to E in an Excel sheet and click [Format (O)] > [Cell (E)] to set the dis-
play format a character string.
Delete Excel sheets 2 and 3.
STEP3: Fill out the Excel sheet with the command code, first data and second data as system data,
left-justified, to create an Excel file.
Sample setting: Set station numbers 3000, 3001 and 3002 for the IP Multiline Terminal.
Click to apply the contents of the script shown in the screen
as system data on the SV8300.
Second data
First data
Command code
4-68
Chapter 4 Standard Mode
Description
) button).
You may enter a comment
in column E.
NWA-033628-001 Rev.1.0
[Tools] Category
)