NEC UNIVERGE SV8300 Pc Programming Manual page 217

Troubleshooting an Error Message is Displayed
Common Error Messages
Error Message
The PS Number xx has already
been registered.
The PS Number xx is not regis-
tered.
'Fill In' button can't be used in
case that Station number contains
* or #.
Some data could not be applied.
Some data could not be cleared.
Failed to clear the data.
Couldn't use this function.
Firstly, connect to System.
Some data could not be deleted.
Failed to delete the data.
No response from the System.
Confirm the conditions of con-
nection.
Cause
–
–
An station number on the
starting line contains a * or
#.
–
–
–
There was no connection
with the system when a plug-
in was launched from the
submenu.
–
–
–
C-5
Appendix C Troubleshooting
Remedial action
The specified PS station number
is already registered.
Take either of the following
actions as appropriate:
1. Modify PS station number
information.
2. Delete the PS station number
once and then register it again.
Register a PS station number
first.
Check the data on the starting
line and then click the [Fill In]
button.
Retry.
Retry.
Retry.
Check the connection with the
system.
Retry.
Retry.
Check the status of communica-
tion with the system.
Continued on next page
NWA-033628-001 Rev.1.0