Huawei USG6000 Upgrade Manual page 100

HUAWEI USG6000&USG9500
Upgrade Guide
By default, the user name and password are admin and Admin@123 respectively for logging
in to the USG6000 through the console port. If you forget the user name and password
configured on the console port, see
Step 5 Configure upgrade environment.
l
l
Issue 01 (2018-01-16)
Configure Telnet for login.
Enable the Telnet service on GE 0/0/0 of the device. Configure AAA authentication and
Telnet for the virtual type terminal (VTY) user interface. Create a local Telnet user and
set the user name to user1, and password to Password1 for the Telenet user. Enable the
Telnet service on the device.
V500R001:
<FW> system-view
[FW] telnet server enable
[FW] interface GigabitEthernet 0/0/0
[FW-GigabitEthernet1/0/3] ip address 192.168.1.1 255.255.255.0
[FW-GigabitEthernet1/0/3] service-manage telnet permit
[FW-GigabitEthernet1/0/3] service-manage enable
[FW-GigabitEthernet1/0/3] quit
[FW] user-interface vty 0 4
[FW-ui-vty0-4] authentication-mode aaa
[FW-ui-vty0-4] user privilege level 3
[FW-ui-vty0-4] quit
[FW] aaa
[FW-aaa] authorization-scheme default
[FW-aaa-auth-default] quit
[FW-aaa] manager-user user1
[FW-aaa-manager-user-user1] password cipher Password1
[FW-aaa-manager-user-user1] level 15
[FW-aaa-manager-user-user1] service-type telnet
[FW-aaa-manager-user-user1] quit
[FW-aaa] bind manager-user user1 role system-admin
[FW-aaa] quit
[FW] firewall zone trust
[FW-zone-trust] add interface GigabitEthernet1/0/3
[FW-zone-trust] quit
Configure SSH for login.
Enable the SSH service on GE 0/0/0 of the device. Configure AAA authentication and
SSH for the virtual type terminal (VTY) user interface. Create a local SSH user and set
the user name to user1, and password to Password1 for the SSH user. Enable the
STelnet service on the device.
V500R001:
<FW>system-view
[FW] interface GigabitEthernet 1/0/3
[FW-GigabitEthernet1/0/3] ip address 192.168.1.1 255.255.255.0
[FW-GigabitEthernet1/0/3] service-manage enable
[FW-GigabitEthernet1/0/3] service-manage ssh permit
[FW] quit
[FW] user-interface vty 0 4
[FW-ui-vty0-4] authentication-mode aaa
[FW-ui-vty0-4] user privilege level 3
[FW-ui-vty0-4] protocol inbound ssh
[FW-ui-vty0-4] quit
[FW] aaa
[FW-aaa] manager-user user1
[FW-aaa-manager-user-user1] password cipher Password1
[FW-aaa-manager-user-user1] level 15
[FW-aaa-manager-user-user1] service-type ssh
[FW-aaa-manager-user-user1] quit
[FW-aaa] bind manager-user user1 role system-admin
[FW-aaa] quit
[FW] stelnet server enable
[FW] ssh user user1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Password of the Console Port Is
1 USG6000
Forgotten.
91