Hardware Support - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
1. Patch upgrades cannot be performed in BootROM.
2. V3 upgrades are not recommended. If there are such requirements, contact Huawei
3. Before rolling V500R001C50 and later versions back to earlier versions, run the set
4. In V500R001C30, api call-home host and api call-home connect commands are used in
Note the following items for patch upgrades:
l After activating the patch and setting the startup configuration file, ensure that the patch is
l If the patch is mistakenly deleted and the system restart fails after the startup configuration

2.1.2 Hardware Support

Table 1 lists all boards applicable to the USG9500, including MPUs, SPUs, SFUs, and LPUs.
The USG9500 has many historical boards and software versions. Certain scenarios do not
support the upgrade or have restrictions. Before the upgrade, you must read this section
carefully and confirm that the current hardware configuration meets the upgrade requirement.
Table 2-1 Supported hardware
BOM
MPU
0305G06R
03056305
0305G06S
0305G08N
0305G06U
Issue 01 (2018-01-16)
NOTICE
engineers.
system-software check-mode all command in the system view. Directly roll other
versions back to earlier ones.
the API view to configure call-home. In V500R001C50, these commands are used in the
system view. If you save the configuration in V500R001C50 and then roll back the system
to V500R001C30, the two commands are lost. In this case, you must manually add the two
commands after rollback.
in activated state when the reboot or reboot fast command is used to restart the system.
Otherwise, the system restart may fail.
file is set, you must re-activate the patch and restart the system again. For a high-end
firewall with dual MPUs, check whether the patch status of both MPUs is normal. If not,
delete the patch and then install and activate it again.
Model
SU9DMPUD0100
E8KE-X3-MPU
EKEX8-
FWCD00SRUA00
E8KE-X8-
SRUA-200
EKEX16-
FWCD00MPUB00
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
First Version That
Supports This
Hardware
V200R001C00
V500R001C00
V200R001C00
V200R001C01
V200R001C00
2 USG9500
Whether to
Support Upgrade
to V500R001C00
Yes
Yes
No
Yes
Yes
107