Huawei USG6000 Upgrade Manual page 168

HUAWEI USG6000&USG9500
Upgrade Guide
Step 4 In the BootROM main menu, enter 3 to access the Ethernet submenu.
Enter your choice(1-12): 3
Ethernet Submenu
Step 5 Change the parameter settings of the Ethernet interface mode. In the Ethernet submenu, enter
3. The following information is displayed. After the parameters are specified, return to the
Ethernet submenu.
Enter your choice(1-4): 3
Note: two protocols for download, tftp & ftp.
'.' = clear field;
boot device
processor number
host name
file name
inet on ethernet (e) : 172.16.104.208
inet on backplane (b):
host inet (h)
gateway inet (g)
user (u)
ftp password (pw) (blank = use rsh): ***
flags (f)
target name (tn)
startup script (s)
other (o)
Parameters to be specified are as follows:
l
l
Issue 01 (2018-01-16)
deleted!
Please input the file name you want to delete, e.g.:
test.txt
('*' for display all files and directory in
cfcard:)
cfcard:/ USG9520V500R001C80SPC100.cc
File "cfcard:/USG9520V500R001C80SPC100.cc" will be deleted!
Are you sure? Yes or No(Y/
N)y
Delete successfully!
After the deletion is complete, enter 3 to return to the BootROM main menu.
1. Download file to SDRAM through ethernet interface and boot
2. Download file to CFcard through ethernet interface
3. Modify ethernet interface boot parameters
4. Return to main menu
You can modify the flags following the menu.
tftp--0x80, ftp--0x0.
'-' = go to previous field;
: motetsec0
: 0
: host
: USG9520V500R001C80SPC100.cc
: 172.16.104.20
:
: 123
: 0x0
:
:
:
boot device
The value of parameter boot device is fixed, that is, mottsec3 for the USG9520 and
motetsec0 for the USG9560 and USG9580.
file name
Indicates the name of the file to be downloaded. The previous information uses
USG9500_USG9520V500R001C80SPC100.cc as an example. If this parameter is blank,
enter the name of the file that you want to download. If this parameter is a file other than
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
^D = quit
2 USG9500
159