HUAWEI USG6000&USG9500
Upgrade Guide
|
=============================================================
Enter your choice (0-5):
Step 3 Enter 2 to rename the current configuration file for startup.
Input the file name you want to rename(eg: hda1:/sup.bin): hda1:/vrpcfg.cfg
Input the new file name: hda1:/vrpcfgrename.cfg
Step 4 After device startup, use the default user name admin and password Admin@123 for login
and use FTP to save the renamed configuration file to the PC.
Step 5 Reconfigure a user and copy the user information generated by the device to the renamed
configuration file.
manager-user newuser
password cipher %@%@@)wB&=/Q1Fvhl1W=,4C)Vpg^C.0{VCnlxU^3svMxY@^A)vmh%@%@
service-type web terminal telnet
level 15
Step 6 Upload the modified configuration file to the device and specify the file as that to be used at
the next startup. After device restart, you can use the configured user information to log in
----End
1.7 Appendix C: Uploading and Downloading Files
1.7.1 Device Serving as the FTP Client to Upload or Download
Files Through FTP
Context
As shown in Figure 1, PC2 serves as the FTP server. Log in to the FTP server from the
USG6000 and upload or download files through FTP. This method requires the third-party
FTP server software to be installed on the PC2.
Figure 1-55 Schematic diagram of uploading/downloading files through FTP and with the
USG6000 serving as the FTP client
Issue 01 (2018-01-16)
NOTE
You can also use a PC as both the Telnet/SSH client and the FTP server. The following example
describes takes the two-PC deployment.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
96