Huawei USG6000 Upgrade Manual page 103

HUAWEI USG6000&USG9500
Upgrade Guide
Figure 1-54 Setting port properties
Step 4 Log in to the USG6000 and access the CLI.
By default, user name admin and password Admin@123 are used to log in to the USG6000
through the console port. If you forget the user name and password configured on the console
port, see
Step 5 Configure the web for login.
Enable HTTP and HTTPS on GE 0/0/0 of the USG6000. Create a local web user and
configure the user name to user1,user level to level 15, and password to Password1 for the
web user. Enable the HTTP and HTTPS service on the device.
<FW> system-view
[FW] interface GigabitEthernet 0/0/0
[FW-GigabitEthernet0/0/0] ip address 192.168.0.1 255.255.255.0
[FW-GigabitEthernet0/0/0] service-manage http permit
[FW-GigabitEthernet0/0/0] service-manage https permit
[FW-GigabitEthernet0/0/0] service-manage enable
[FW-GigabitEthernet0/0/0] quit
[FW] aaa
[FW-aaa] manager-user user1
[FW-aaa-manager-user-user1] password cipher Password1
[FW-aaa-manager-user-user1] service-type web
[FW-aaa-manager-user-user1] level 15
[FW-aaa-manager-user-user1] quit
[FW-aaa] quit
[FW] web-manager enable
[FW] web-manager security enable port 8443
Issue 01 (2018-01-16)
Password of the Console Port Is
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Forgotten.
1 USG6000
94