Huawei USG6000 Upgrade Manual page 98

HUAWEI USG6000&USG9500
Upgrade Guide
is cancelled or you desire to use SSH for the login, log in to the USG6000 from the console
port to construct the Telnet or SSH environment.
Figure 1 shows the connection for configuring the upgrade environment using the console
port. The serial port of the PC is connected to the console port of the device with a standard a
serial cable.
The device has two types of console ports: RJ45 and mini USB console ports. If an RJ45
console port is used, use the console cable delivered with the device. Using the cables of other
vendors might cause unexpected faults. If a mini USB console port is used, purchase the mini
USB-to-USB cable as required. The RJ45 and mini USB console ports cannot be used
together. If both ports are connected, only the mini USB console port is available.
Figure 1-47 Establishing the upgrade environment through the console port
Procedure
Step 1 Select Start > All Programs > Accessories > Communication > HyerTerminal to start the
terminal simulation program (for example, Windows XP HyerTerminal) on the PC. The
Connection Description dialog box is displayed, as shown in Figure 2.
Figure 1-48 Connection Description dialog box
Step 2 Click OK and the Connect to dialog box is displayed. Select the serial port (such as COM1)
of the PC for connecting to the USG6000 from the Connect using drop-down list box, as
shown in Figure 3.
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
89