Huawei USG6000 Upgrade Manual page 95

HUAWEI USG6000&USG9500
Upgrade Guide
................................................................................
................................................................................
................................................................................
................................................................................
..................................................................Done.
The next boot package file is <hda1:/V500R001C**.bin
Table 1-5 Parameters of FTP download
Parameter
Protocol type
Unit number
Server IP address
Board IP address
FTP user name
FTP user password
Load file name
Target file name
Download file to
After the download is complete, the device automatically specifies the downloaded system
software as that to be used at the next startup. Enter 0 to return to the load and upgrade menu.
Then, enter 0 to return to the BootROM main menu.
Step 6 In the load and upgrade menu, enter 3 to download the converted configuration file.
=================< Load and Upgrade Menu >==================
| <1> Display File List
|
| <2> Upgrade Application Software
|
| <3> Download File from External Server
| <4> Upload File to External Server
| <5> Upgrade Extended Bootrom
| <6> Upgrade Base Bootrom
| <0> Return to Main Menu
|
============================================================
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the protocol used for download.
The value 1 indicates FTP, and the value 2
indicates TFTP.
Indicates the interface connected to the
external FTP server (PC 2). Only 0 can be
entered in this field to identify
GigabitEthernet0/0/0.
Indicates the IP address of the external FTP
server (PC2).
Indicates the IP address of the device
interface.
Indicates the user name, which must be the
same as that specified on the FTP server.
Indicates the password, which must be the
same as that specified on the FTP server.
Indicates the name of the system software.
Indicates the name of the system software to
be saved.
Indicates the location in which the system
software is saved.
|
|
|
|
1 USG6000
86