Appendix: Establishing The Upgrade Environment Through The Console Port - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
2.4 Appendix: Establishing the Upgrade Environment
Through the Console Port
Prerequisites
The prerequisites for console port login are as follows:
l
l
l
Background Information
IP address 192.168.0.1 has been set for interface GigabitEthernet 0/0/0 on the MPU of the
USG9500 by default. You can use this IP address and the default user name admin and
password Admin@123 to log in to the CLI of the USG9500 through Telnet. If the Telnet
configuration is canceled or you desire to use SSH for the login, log in to the USG9500 from
the console port to construct the Telnet or SSH environment.
Figure 1 shows how to construct the Telnet or SSH environment through the console port. The
serial port of the PC is connected to the console port of the USG9500 through a standard
RS-232 configuration cable.
Figure 2-15 Establishing the upgrade environment through the console port
Procedure
Step 1 Select Start > All Programs > Accessories > Communication > HyerTerminal to start the
terminal simulation program (for example, Windows XP HyerTerminal) on the PC. The
Connection Description dialog box is displayed, as shown in Figure 2.
Issue 01 (2018-01-16)
A PC (with RS232 serial port) and an RS-232 cable are available.
A terminal simulation program (such as Windows XP HyerTerminal) is installed on the
PC.
The USG9500 is powered on and running properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 USG9500
177