Appendix: Applying For A License; Appendix: Upgrade Record Table - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
[USG9500] diagnose
[USG9500-diagnose]
Step 3 Run the active mpu-esn command to activate the ESN of the master MPU.
[USG9500-diagnose] active mpu-esn
If both MPUs can be detected on the device, run the following command to activate the ESN
of the standby MPU.
[USG9500-diagnose] active mpu-esn slave-board
If the current device does not support the active mpu-esn slave-board command, you need to
run the active mpu-esn command on both MPUs respectively. That is, insert MPU A first.
After MPU A is successfully registered, run the active mpu-esn command. Then pull out
MPU A, and insert MPU B. After MPU B is successfully registered, run the active mpu-esn
command. After the previous operations are complete, ensure that both MPUs are in position
at the same time, and then perform subsequent operations.
----End

2.7 Appendix: Applying for a License

Context
The license file to be loaded on the device is a .dat file. This file is not delivered with the
device and is independently generated by the license center of Huawei.
Procedure
Step 1 The license on each device is unique. For the license center to generate the license for your
device, you need to collect the following information:
l
l
Step 2 Provide the previous information to the local technical support personnel of Huawei. The
application will be handled as soon as possible.
Step 3 ou need to obtain a new license if you want to enlarge the license capacity or use new services
that are subject to license control. In this case, the previous procedure still is applicable. The
license center automatically combines the licenses for new features with the existing license,
and generates a new license.
----End

2.8 Appendix: Upgrade Record Table

Issue 01 (2018-01-16)
Contract No.
It is available in the license certificate that is delivered with the device.
Equipment serial number (ESN)
It is displayed after you run the display license command in any view of the CLI.
NOTE
l The ESN identifies a device from all other devices. It is recorded in the electrical label of the MPU.
If the device has two MPUs, record the ESNs of both the active and standby MPUs.
l The ESN is case-sensitive. Note the case when you record the ESN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 USG9500
185