Huawei USG6000 Upgrade Manual page 154

HUAWEI USG6000&USG9500
Upgrade Guide
Step 6 Rename paf.txt to paf_spcxxx.txt and upload it to the CF card 1 in USG9500. If a file with the
same name exists in CF card 1, the system prompts you to determine whether to overwrite the
original file.
ftp> put paf_spcxxx.txt
..........
ftp: 66033 bytes sent in 0.05Seconds 1320.66Kbytes/sec.
After the uploading is complete, check whether the size of the file in the CF card is the same
as that on PC2. If no, re-upload the file to ensure that it is completely uploaded to the CF card.
After the uploading is complete, check whether the size of the file in the CF card is the same
as that on PC2. If no, re-upload the file to ensure that it is completely uploaded to the CF card.
Step 7 After files are uploaded, exit from the FTP environment. On PC1, log in to the CLI of the
USG9500 through Telnet or SSH. You are advised to use SSH to log in to the USG9500 to
secure data transfer.
Step 8 If both MPUs are present, run the copy command in the user view to copy
USG9520V500R001C80SPC100.cc, PAF,CFG and license to the standby MPU.
<USG9500> copy cfcard:/USG9520V500R001C80SPC100.cc slave#cfcard:/
<USG9500> copy cfcard:/vrpcfg_new.cfg slave#cfcard:/
<USG9500> copy cfcard:/paf_spcxxx.txt slave#cfcard:/
<USG9500> copy cfcard:/license_spcxxx.txt slave#cfcard:/
Step 9 Run the startup system-softwarefilename command to configure the version software used
for the next startup of the USG9500.
<USG9500> startup system-software USG9520V500R001C80SPC100.cc
Info: Succeeded in setting the software for booting system.
Step 10 Run the startup licensefilename command to configure the license file used for the next
startup of the USG9500.
<USG9500> startup license license_spcxxx.txt
Info: Succeeded in setting main board resource file for system.
Step 11 Run the startup paffilename command to configure the PAF file used for the next startup of
the USG9500.
<USG9500> startup paf paf_spcxxx.txt
Info: Succeeded in setting main board resource file for system.
Step 12 Run the startup save-configuration filename command to set the configuration file used for
the next startup of the USG9500.The uploaded configuration file is the post-conversion one.
<USG9500> startup save-configuration vrpcfg_new.cfg
Info: Succeeded in setting the configuration for booting system.
Step 13 If both MPUs are in position, run the following commands in the user view to configure the
version software, license file and PAF file for the next startup of the standby MPU of the
USG9500.
<USG9500> startup system-software USG9520V500R001C80SPC100.cc slave-board
Info: Succeeded in setting the software for booting system.
<USG9500> startup license license_spcxxx.txt slave-board
Info: Succeeded in setting slave board resource file for system.
<USG9500> startup paf paf_spcxxx.txt slave-board
Info: Succeeded in setting slave board resource file for system.
Step 14 (Optional) Upgrade Content Security Features.
Issue 01 (2018-01-16)
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 USG9500
145