Huawei USG6000 Upgrade Manual page 125

HUAWEI USG6000&USG9500
Upgrade Guide
Command
ad-server source { loopback
interface-number | ip-
address ip-address | vlanif
interface-number }
undo ad-server source
debugging hardware fast-
forwarding filter acl acl-
number [ number packet-
number ]
undo debugging hardware
fast-forwarding filter
failover commit
display firewall scale
statistic session
firewall scale finish
display cluster channel
status verbose [ backup |
forward | negotiation ]
[ node-id ]
undo cluster session-sync
filter enable
cluster session-sync filter id
id { exclude | include }
{ protocol { protocol-type
[ port port-number ] |
protocol-number } | existed-
time existed-time } *
undo cluster session-sync
filter id id
Issue 01 (2018-01-16)
Description
The command configures
the source IP address that a
device uses when sending
packets to the AD server.
The command restores the
default configuration.
The command enables the
function of filtering
hardware fast forwarding
debugging information.
The command disables the
function of filtering
hardware fast forwarding
debugging information.
The command submits SPU
backup configurations.
The command displays
statistics on migrated
session entries after SPU
scaling or the SPU backup
status changes.
The command terminates
scaling tasks.
The command displays
detailed information about
the cluster channel status.
The command disables the
cluster session
synchronization filtering
function.
The command sets filtering
conditions for cluster
session synchronization.
The command deletes
filtering conditions for
cluster session
synchronization.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 USG9500
Impact
None
None
None
None
None
None
None
None
None
None
None
116