Backing Up The Important Data In Cf Card - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
Route Port,The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0018-8239-1e5c
Media type: twisted-pair ,Link type: auto negotiation
Loopback:none, Maximal BW:1G, Current BW:1G,full-duplex mode, negotiation:
enable, Pause Flowcontrol:Receive Enable and Send
Enable
Last physical up time
Last physical down time : 2013-04-12 17:54:36 UTC+08:00
Max input bit rate: -
Max output bit rate: -
Max input packet rate: -
Max output packet rate: -
Statistics last cleared:never
Last 300 seconds output rate: 216 bits/sec, 0 packets/sec
Input: 228 bytes, 3 packets
Output: 58214 bytes, 647 packets

2.2.4.7 Backing Up the Important Data in CF Card

Context
The important data refers to the configuration file, license file(*.dat), patch file, and system
program before the upgrade. You can use the display startup command to view the
configuration file, patch file, and system program in use and the display license command to
view the license file in use.
Do as follows to back up the important data in CF card:
Procedure
Step 1 On PC2, log in to the USG9500 through FTP.The following uses the FTP client of the
Windows operating system as an example. In practice, you are advised to use a legitimate
third-party FTP client (such as Cute FTP) to transfer files.
The following information is displayed:
C:\> ftp 192.168.0.1
Connected to 192.168.0.1.
220 FTP service ready.
User (192.168.0.1:(none)): ftpuser
331 Password required for ftpuser.
Password:
230 User logged in.
ftp>
Issue 01 (2018-01-16)
: 2013-04-12 17:54:44 UTC+08:00
Last 300 seconds input rate: 0 bits/sec, 0 packets/sec
Input:
Unicast: 0 packets, Multicast: 2 packets
Broadcast: 1 packets, JumboOctets: 0 packets
CRC: 0 packets, Symbol: 0 packets
Overrun: 0 packets, InRangeLength: 0 packets
LongPacket: 0 packets, Jabber: 0 packets, Alignment: 0 packets
Fragment: 0 packets, Undersized Frame: 0 packets
RxPause: 0 packets
Output:
Unicast: 0 packets, Multicast: 647 packets
Broadcast: 0 packets, JumboOctets: 0 packets
Lost: 0 packets, Overflow: 0 packets, Underrun: 0 packets
System: 0 packets, Overruns: 0 packets
TxPause: 0 packets
Unknown Vlan: 0 packets
Input bandwidth utilization
Output bandwidth utilization : 0.01%
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 0.00%
2 USG9500
139