Impact Of Command Changes - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
Feature
IPSec
IPSec
IPSec
Deleted Features
None

2.1.3.1.2 Impact of Command Changes

New Commands
Command
[ undo ]ppp accm { accm |
enable }
display inventory ne-id ne-
id
display rm bfd-session [ all |
[ [ vpn-instance vpn-
instance-name ]
[ destination destination-
address ] [ source source-
address ] [ interface
interface-type interface-
number ] [ protocol { bgp |
isis-l1 | isis-l2 | isis-l1l2 |
ospf | rip | pim } ] ] ]
[ undo ] ipv6 route-static
track bfd-session session-
name STRING<1-15>
admindown invalid
Issue 01 (2018-01-16)
Change Description
The maximum IPSec
anti-replay window size
can be 8K.
IPSec supports the
DH18 algorithm.
Interworking between
multi-VPN instance and
IPSec is supported.
Description
Enables/disables the PPP
ACCM function.
Displays the inventory data
of a specific NE.
displays the configurations
of BFD sessions in Route
Management (RM). The
configurations include the
global status of BFD,
number of BFD sessions,
and VPN instance,
destination address, source
address, interface, and
session status of each BFD
session.
The command deletes the
configured static routes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Cause Impact of the Upgrade
The function is
None
enhanced.
The function is
None
enhanced.
The function is
None
enhanced.
2 USG9500
Impact
None
None
None
None
111