Performing The Upgrade - Huawei USG6000 Upgrade Manual

HUAWEI USG6000&USG9500
Upgrade Guide
Figure 1-46 Flowchart for upgrading the system software using BootROM

1.5.3 Performing the Upgrade

Context
The serial port of PC1 is connected to the console port of the device with a standard RS-232
configuration cable. Run the terminal emulation program (use the HyperTerminal in the
Windows XP as an example) on PC1 to ensure that PC1 communicates with the console port
of the device.
Procedure
Step 1 Configure the FTP server.
Install the FTP server program on PC2 and configure the FTP server using the document
delivered with the program. The premise is that you obtain the FTP server program in a
legitimate way. You have already created an FTP user whose name is 123 and password is
123 and configured the root directory of the user as the directory of the files to be uploaded or
downloaded.
Step 2 Power on or reboot the device.
Step 3 After the device is powered on, you can run the terminal emulation program on PC1 to check
the device startup process. When the following information is displayed, press Ctrl+B within
three seconds.
Base
Issue 01 (2018-01-16)
Bootrom Ver: 021 May
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 2014 15:58:31
1 USG6000
83