Huawei NetCol8000-A Series User Manual page 114

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
No.
----End
Follow-up Procedure
After you have completed the settings, perform the following checks to confirm whether the
teamwork control is available:
1.
2.
3.
4.
Issue 10 (2019-01-15)
Parameters
bright gray
Check whether the device number on the topology is the same as the actual device
number.
− If yes, go to 2.
− If no, check the cable connection and the settings of teamwork control parameters.
Check whether the number of the active devices on the topology is the same as the actual
device number.
− If yes, go to 3.
− If no, check the cable connection and the settings of teamwork control parameters.
Check whether the number of standby devices on the topology is the same as the actual
device number.
− If yes, go to 4.
If no, check the cable connection and the settings of teamwork control parameters.
−
Check whether the number of online devices on the topology is the same as the actual
device number.
− If yes, the check is complete.
− If no, check the cable connection and the settings of teamwork control parameters.
Copyright © Huawei Technologies Co., Ltd.
Note
shown in
Bright gray indicates that the device is operating
without any critical alarms, as shown in
.
5 ACC Introduction
.
105