NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 6-8 Removing the fan cover
Step 12 Remove the four screws on the motor control box at the bottom of the fan using a 5x200 mm
flat-head screwdriver.
Figure 6-9 Removing the fan motor control box
Step 13 Open the electric control box, press down the areas marked gray in
small-sized flat-head screwdriver, pull out all signal cables and power cables, and remove the
screw (PE cable) in the area marked yellow in using a 5 x 200 mm flat-head screwdriver.
Issue 10 (2019-01-15)
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
Figure 6-10
using a
165