Huawei NetCol8000-A Series User Manual page 80

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 3-55 Connecting the signal cable to the HWA cable terminal
Step 2 Remove the fastener of the high water level detection switch.
Figure 3-56 Removing the fastener
Step 3 Secure the automatic overfall gap. The top of the automatic overfall gap of the infrared
humidifier is 25 mm above the water pan bottom. However the automatic overfall gap may
become loose or deviated from the water pan. Therefore, secure the automatic overfall gap to
the bottom of the water pan bottom.
Issue 10 (2019-01-15) Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
71